See more...

Available for Purchase: Yes

The striking Big Boy Silver is a centerfire edition of the Golden Boy Silver. Reminiscent of the days when prized guns were nickel plated to protect them, the Big Boy Silver goes a step further, with a unique solid aluminum-bronze alloy frame that's tougher than brass and can be polished as needed to maintain a brightly gleaming silver look. This Deluxe edition includes deep, luxurious engraving on the receiver.

This lever action repeater sports a 20" octagonal barrel, semi buckhorn rear sight, and brass bead front, with an American Walnut stock. Built with the highest standards of construction and accuracy, Henry rifles are rugged, sharp shooting and beautiful rifles you'll be proud to pass on to the generation to come.

.44 Magnum (also accepts .44 Special)
Lever action repeater
Engraved silver color aluminum/bronze alloy receiver
20" octagonal barrel
10 rounds capacity
Semi buckhorn rear sight, brass bead front
American walnut stock
Overall length 38.5"
Manufacturer Henry
Manufacturer Part # H006SD
Condition New
Classification Non-Restricted

Price: 2229.99
See more...

Famae SG 542-1 - .308 - Non Restricted

The FAMAE SG 540-1 and SG 542-1 rifles are gas operated, rotating bolt battle rifles developed by Schweizerische Industrie Gesellschaft (SIG). The rifles are built in Chile for the Chilean military. SIG designers used a long-stroke piston-driven action (with the recoil spring wrapped around the piston rod itself) and a 3 position adjustable gas regulator. The firearm is locked into battery by means of a rotating bolt which features two massive steel locking lugs. The receiver is made from steel and has two major parts, upper and lower, which are connected by pushpins. Rear sights are diopter drum-style sights.

  • Semi-Automatic
  • Fixed Synthetic Stock
  • 495mm Barrel
  • Two 5 Round Magazines
  • Sling
  • Cleaning Kit

Price: 2289.99
See more...


The combination of a Weatherby Mark V ® action and Lapua Magnum Ammunition is one of the most lethal hunting systems you can buy. Nothing shoots flatter, hits harder or is more accurate than a Weatherby. Ideal for long-range shooting to 1,000 yards Button-rifled, #3 contour, chrome moly free-floated barrel with recessed target crown Features fluted barrel with matching Accubrake™ Matte bead blasted blued finish


  • Caliber .338 Lapua Mag.
  • Action RH 26"
  • Weight 9 lbs.
  • OAL 48 5/8"
  • Capacity 2+1
  • Barrel Length/Contour 28" #3
  • Rate of Twist 1-9.3"
  • Length of Pull 13 5/8"
  • Drop at Comb 3/4"
  • Drop at Heel 1 3/4"
  • Monte Carlo 5/8"

Price: 2199.99
See more...

Available for Purchase: Yes

A gold plated Henry rifle presented to President Abraham Lincoln hangs in the Smithsonian today. The Big Boy Deluxe 3rd Edition is reminiscent of that rifle. With engraving inspired by 19th century engraver Louis Nimschke, this rifle is a true heirloom quality treasure that will be carried and displayed with pride for generations to come. Production is limited to just 1000 units in each caliber.

.44 Remington Magnum
Lever action repeater
20" octagonal barrel
10 rounds capacity
Solid brass receiver and butt plate
Brasslite barrel band
Engraved receiver and barrel band
Adjustable buckhorn rear sight
American walnut stock
Overall length 38.5"
Weight 8.68 lbs
Manufacturer Henry
Manufacturer Part # H006D3
Condition New
Classification Non-Restricted

Price: 2199.99
See more...

Available for Purchase: Yes

Caliber: .223 / 5.56mm NATO
Barrel Length: 18"
Color: OD Green Cerakote
Capacity: 5 (1 mag included)

18” heavy contour, hand-lapped button twisted rifled, fluted to reduce weight and heat
4150 Mil-B-11595 chrome-moly-vanadium alloy (machine gun rated)
70 rockwell case hardened (Nitrate) heat treated “5R” polygonal
barrels are 2 times harder than Mil-Spec & hammer forged barrels
Corrosion resistant and 10 times thicker and harder than
Mil-Spec chromed lining
“5R” polygonal right handed 1 x 8 twist hand-lapped button rifled barrels from Rock Creek Barrels, Inc.
POF-USA muzzle device
Chamber: 5.56 mm NATO (.223 Rem.)

Method of Operation:
Gas piston operated, rotating bolt (short stroke system)
2-position gas plug for normal (N) or suppressed (S) operating modes
C.R.O.S.™ (Corrosion Resistant Operating System)
Nitrate heat treated: barrel, gas block/tube (billet machined), gas plug
NP3™ coated (billet machined), gas piston chromed (billet machined),
bolt carrier assembly NP3™ coated (one-piece billet machined)

Sling/Bi-pod mount
POF-USA M.R.R.™ Hunting/Sniper free floating rail system

Upper Receiver:
POF-USA M.R.R.™ Modular Railed Receiver, billet machined 7075-T6
aircraft aluminum alloy
2-piece upper receiver with free floating monolithic top rail
Oversized heat sink barrel nut
A3 flattop

NP3™ Plating:
NP3™ is a combination of a nickel alloy plating combined with
Polytetrafluoethylene aka Teflon. The plating components with
electroless or autocatalytic nickel is one of the most rapidly
developing metal finishing processes. The advantages of coating
uniformity, corrosion resistance and hardness are providing designers
with opportunities to protect and improve base materials in ways that
were not previously possible.

Bolt & Carrier:
Nickel Teflon plated 8620 integral keyed steel bolt carrier
(billet machined), heat treated/plated per Mil-Spec
Roller cam pin NP3™ coated
.223 bolt: chrome plated heat treated to Mil-Spec

Lower Receiver:
P415, Gen III billet machined 7075 T-6 aircraft aluminum alloy
with integral oversized trigger guard
Ambidextrous bolt release lever machined into the lower receiver
Tactical Integrated Trigger System 4.5 lb. non-adjustable single stage competition trigger group
Mil-Spec, semi and full auto trigger groups (LEO/Military Only)
KNS™ anti-walk pins
Magpul™ MOE™ pistol grip and Magpul™ CTR™ buttstock

POF-USA Specifications:
All raw materials are manufactured from U.S. steel mills.
All heat treats, plating/coatings, are completed by U.S. owned
and operated manufacturers.
All accessory and component parts on weapons systems are U.S. owned and operated manufacturers.
All of our weapon systems are 100% pure American made.
Regulated short stroke gas piston weapons system requires no lube!
SKU RIFLE:847313004086
Manufacturer POF-USA, Patriot Ordnance Factory
Manufacturer Part # R415-18-11M-223-C3
Condition New
Classification Restricted

Price: 2379.99
See more...

Sig Sauer MCX Carbine

The Sig Sauer MCX is an innovative system built around a battle-proven core: Sig's gas-operated, auto-regulating, short-stroke piston system. The MCX is an incredibly modular, mission-adaptable rifle that allows the user to change calibers, barrel lengths, and stocks in a matter of seconds without any special tools. Changing from .300 BLK to 5.56 NATO only requires a swap out of the barrel and op rod, while converting to 7.62x39 also requires a swap out of the bolt.

The MCX lower receiver is proprietary and cannot be used with a regular AR15 upper because of its inability to accomodate a buffer tube assembly. This is possible because the MCX uses an innovative recoil assembly with a pair of captive recoil springs directly attached to the bolt carrier and located completely within the upper receiver where the charging handle usually is on the standard AR platform. This causes a little bit more girth in the upper receiver with a slightly raised, relocated charging handle, but is more than balanced out with a skeletonized stock replacing almost the entire back half of the standard AR rifle. The stock is mounted onto a vertical Picatinny located on the rear of the lower receiver and is a left side-folding stock designed not to interfere with any operational controls or the ejection port. The upper is reverse compatible with any Mil-Spec AR15 lower, allowing you to upgrade your existing AR platform to the MCX.

The MCX comes with many additional features designed to adapt to any user and situation. An aluminum KeyMod handguard keeps the forend extremely light while providing the ability to mount accessories as required. A full length top rail extends out to the gas block to provide plenty of sturdy real estate for mounting optics and sight systems. QD mounting points are available on either side of the rear of the lower receiver and at the end of the stock as well. The bolt lock is extended and textured and the charging handle, magazine release, and fire controls are all ambidextrous and enlarged for more positive manipulation.

The Sig MCX is extraordinarily light for an AR, but, despite that, is an impressively durable and reliable system. Its gas regulator allows it to seamlessly fire subsonic and supersonic ammunition without issue. It can be easily accessed by removing the handguard, which is held in place by the front takedown pin and slides off effortlessly. Common wear points on the standard AR platform are made to be replaceable on the MCX. These include a cam path insert, feed ramp insert, replaceable deflector and replaceable charging handle catch point inserts. The MCX is engineered to be the complete package, combining extreme balance and modularity, ease of manipulation and control, and is as durable and reliable as it is accurate.


  • Caliber: 5.56 NATO
  • Capacity: 5
  • Action: Semi-Auto
  • Operating System: Short-Stroke Gas Piston, Rotating Bolt
  • Stock: Skeletonized, Left-Folding
  • Sights: Full-Length Top Rail, Flip-Up Front/Rear
  • Barrel: 16" Cold Hammer Forged
  • Twist: 1:7
  • Safety: Ambidextrous
  • Trigger Pull: ≈7.5 lbs.
  • Overall Length: 35.75"
  • Weight: 6 lbs.

This is a Restricted Firearm.

Price: 2399.95
See more...


With the largest field of view, eye box, clearest image edge to edge, true daytime illumination, and a variety of unique and innovative reticles, the K15i is in a class of its own. An integrated magnification throw lever allows for instant magnification changes even in the most adverse environmental conditions. The K15i, like all KAHLES riflescopes, provides mechanical durability, accuracy, and repeatability that are second to none. When failure is not an option and ultimate performance is a must, choose the KAHLES K15i, as this is the most advanced low power variable scope ever produced! Don’t take our word for it. See why many Pro-Series 3-Gun competitors choose the KAHLES K15i.


  • Magnification (x): 1-5
  • Obj. Lens diameter (mm): 24
  • Field of view (ft/100yds): 127.0-24.0
  • Eye relief (inch): 3.74
  • Diopter compensation (dpt): +2/-3.5
  • Impact corr. per click (Mil): .1
  • Tube diameter (mm): 30
  • Length (inch): 10.9
  • Weight (oz): 16.9
  • Illuminated: Yes
  • Focal plane: Second
  • Reticle: G4B

Price: 2159.99
See more...

Availability: In Stock

These are brand new. When we imported them they were legal semi auto restricted firearms. When they arrived the FRT was “Under review” which prevented us from registering them. After the RCMP declared prohibited we failed to qualify for compensation as they were not registered! I guess we were a bit slow and were out maneuvered.

If you have a business licence for Prohib or a museum we can sell them to you as is.

Our landed cost was $2,900.00, will sell for $2,000.00 deactivated, each plus shipping and tax.

Sold “as is” no returns.

Price: 3000.00
See more...


Since its introduction in late 1997, the STI Edge has become the undisputed standard for USPSA/IPSC Limited Division competition shooting as demonstrated by Michael Voigt and Frank Garcia finishing one/two as they led the US IPSC Limited Team to victory at World Shoot XII. It has been adopted by SWAT teams, HRT teams, street cops, and law enforcement training sites. It has been embraced by almost all other shooting disciplines.


  • Calibers .40 S&W
  • Grips Black Glass Filled Nylon Polymer
  • Slide Unique, Round Top With STI Front and
  • Rear Cocking Serrations
  • Trigger STI Long Curved Trigger
  • Barrel 5.01” STI Bull Barrel, Ramped, Fully
  • Supported
  • Safeties STI High-Ride Beavertail Grip Safety
  • Ambidextrous Thumb Safeties (Stainless)
  • Sights STI Competition Front
  • STI Adjustable Rear
  • Overall Length 8.5”
  • Weight 38.1 oz

Price: 2189.99
See more...


Completing the line between main production and the Performance Center, the Smith & Wesson Pro Series represents the next step from standard models. These firearms are offered with a variety of enhancements yet still remain true to "stock." Bringing competition specifications and features to factory models, the Pro Series offer that ready-to-go package while still maintaining production line integrity. THE HOUSE OF 1911S - ALL 1911 PISTOLS SHIP FREE!!


  • Caliber: 9mm
  • Capacity: 10+1 Rounds
  • Barrel Length: 5" / 12.7 cm
  • Front Sight: Black Dovetail
  • Rear Sight: Adjustable
  • Overall Length: 8.7" / 22.1 cm
  • Weight: 41 oz. / 1,162.3 g
  • Grip: Wood
  • Frame Material: Stainless Steel
  • Slide Material: Stainless Steel
  • Finish: Matte Silver

Price: 2089.99
Best online ammo prices -